Fig 4.1 Side Guide Bar And Tilt Lock Adjustment - Vinten Mk 5 Maintenance Manual

Side guide bar adjustment.
5 Eliminate fore and aft play in the side guide bars as follows (Fig 4.1)
5.1 Remove camera.
5.2 Remove locking plates and stow.
5.3 Tilt head to maximum front elevation (nose up).
5.4 Slacken clamp screw (2).
5.5 Turn eccentric adjusters (1) until fore and aft play is eliminated.
5.6 Tighten clamp screw (2).
5.7 Repeat the above operations on each side of head.
NOTE: It is unnecessary to lubricate side guide bars, cam faces or rollers. As only a rolling action
occurs at these points any oil or grease will only attract dust and dirt, to the detriment of
the surfaces and the operation of the unit. Wipe the aforementioned faces over with a dry
cloth as and when necessary.
(3)
20

Fig 4.1 Side guide bar and tilt lock adjustment

Contents
Mk 5 Pan & Tilt Head Maintenance Manual
Previous Previous
First Next
Page Page View
Page
(1)
(2)
(1)