Table of Contents
Advertisement
224
What
do I do now ?
• Remove the "max . 50 mph" (80 km/h)
sticker from the sealant bottle and affix it to
the instrument cluster in the dr iver's view.
A
WARNING
- Turn the hazard flashers on and set up
the warning t riang le if you have a flat
t ire in moving t raff ic. In this way you pro-
tect yourself and ot he r road users.
- Make su re that all passengers are in a
safe place, out of the dange r zone (for
exa mple, behind a guard ra il).
(D
Note
Part icular care is necessary if you are mak-
ing a tire repair on a steep incline.
{!)
Tips
Obey a ll laws.
Making a tire repair
Applies to vehicles: with Tire Mobility System
Tire repair consists of the following sections.
Fig. 164 Parts of the Tire Mobility System
Fig. 165 Connecto r fo r t he Tire Mobil ity Syst em
-
l )
The electr ic a ir pump s houl d never ru n fo r lo nger than
8 minut es.
Assembling Tire Mobility System
• Ope n the lid @ of th e e lectr ic air pump
¢
fig . 16 4.
• Pull the plug @) and the pressure hose ®
with the gauge out of the housi ng.
• Screw the pressure hose ® of the electric
air pump onto the flange ® of the sealant
bott le @ .
• Push t he sea lant bo tt le with the flange
down into the recess @ on th e lid of the
elec tr ic air pump.
• Remove the d ust cap from t he valve of the
defective t ire .
• Screw the hose @) onto the valve
0
<=>
fig.165.
• Insert the plug @ <=> fig. 164 into t he socket
for the cigarette lighter.
• Switch on the ign ition.
Inflating tire
• Move the swit ch @ ¢ fig . 165 on the elec-
tric air pump
l)
to position I. After 5 mi-
nutes , tire pressure m ust have reached at
least 1.8 bar .
• Switch the e lectric air pump off - switch in
position 0 . If t he required t ire pressure of at
least 1.8 bar has not been reached, follow
the inst ructions in the section Re-inflating
tire.
Re-inflating tire
• Remove the hose from the valve and pull
the plug out of the socket.
• Drive the veh icle slowly 10 me ters back-
wa rd o r fo rward . This helps to distribu t e the
sealant be tter.
• Remove the empty inflat ion bot t le a nd
screw t he hose ® ¢ fig. 164 from the e lec-
tric pump direct ly onto the valve.
• Insert the plug @ <=> fig. 164 into t he socket
for the cigarette lighter.
• Switch o n the ignition .
...
Advertisement
Table of Contents
