Table of Contents
Advertisement
Quick-start guide for XENSIV™ PAS CO2 Sensor2Go
evaluation kit
(ABOC)
Figure 8
Expandable section view
Note:
Data acquisition stops if the connected sensor loses power supply. For long-term measurements
please make sure that the laptop/PC is not entering into sleep mode or power-saving mode.
3.4
Main Toolbar
The main toolbar of the XENSIV
to the functionality they provide (see Figure 8). Those sections are following:
•
Connectivity → Device selection and connection controls
•
Acquisition → Acquisition controls
•
Logging → Logging Settings button
•
Help/Forum → For general GUI features
Figure 9
Main Toolbar for XENSIV
Data Logging:
XENSIV
PAS CO2 Sensor2Go GUI application provides a possibility to log measurements and save them into a
TM
CSV file. Automatic Logging is turned on by default. The default logging path is
"C:\Infineon\Fusion_GUI_Exports".
Both the logging path and automatic logging option can be set in the Logging Settings window. The logging
settings window can be opened with the Logging setting button (see Figure 8) visible in the main application
toolbar and also in Main Menu → Settings.
User manual
PAS CO2 Sensor2Go GUI consists of controls grouped in four sections according
TM
PAS CO2 Sensor2Go GUI.
TM
9 of 14
V 1.3
2024-03-01
Advertisement
Table of Contents
