Software; Step 1: Downloading The Gui; Step 2: Installing The Gui - Infineon XENSIV PAS CO2 Sensor2Go Quick Start Manual

Quick-start guide for XENSIV™ PAS CO2 Sensor2Go
evaluation kit
(ABOC)
3

Software

XENSIV™ PAS CO2 Sensor2Go kit can be evaluated on the XENSIV
solution. Just install the tool in your PC, connect the evaluation kit with your PC and start evaluating the CO
sensor.
3.1

Step 1: Downloading the GUI

Before installing the XENSIV™ PAS CO2 Sensor2Go GUI, please uninstall any previous version of the same GUI.
The XENSIV™ PAS CO2 Sensor2Go GUI can be downloaded from the Infineon toolbox. Please, download the
toolbox from the following link:
Link to Toolbox: https://www.infineon.com/cms/en/tools/landing/infineontoolbox.html
Then search for 'XENSIV PAS CO2 Sensor2Go GUI' within the toolbox launcher and install the latest version.
Figure 5 XENSIV
TM
3.2

Step 2: Installing the GUI

Press the install button from figure 4 and go through the following steps.
User manual
PAS CO2 Sensor2Go GUI download from the toolbox
PAS CO2 Sensor2Go GUI. It is a plug-and-play
TM
6 of 14
2
V 1.3
2024-03-01