Table of Contents
Advertisement
Quick-start guide for XENSIV™ PAS CO2 Sensor2Go
evaluation kit
(ABOC)
3.5
Additional features
In the installed GUI, customers can use different functionalities of the XENSIV
additional features, for each of the individual sensors, steps are mentioned in the following figure 9.
Figure 10
Additional feature window
Alarm threshold [ppm]:
The customer can set the alarm threshold values. If that threshold is surpassed then the customer can see the
change in the status color for the set sensor respectively. The alarm threshold will provide the visual alert only.
Pressure compensation [hPa]:
Pressure compensation can be triggered by manually setting the pressure values either via the slider box or
typing directly into the text box.
ABOC:
Automatic Baseline Offset Correction (ABOC) can be turned ON/OFF and the baseline value can be adjusted by
manually setting the CO
directly into the text box.
After changing the related settings press enter and click the "Apply all settings" button from the bottom left
corner of the screen as shown in Figure 10.
Figure 11
The "Apply all settings" button
User manual
values in the "reference CO2 baseline [ppm]" either via the slider box or by typing
2
10 of 14
PAS CO2 sensor. For accessing
TM
V 1.3
2024-03-01
Advertisement
Table of Contents
