Step 3: Connect Xensiv Tm Pas Co2 Sensor2Go - Infineon XENSIV PAS CO2 Sensor2Go Quick Start Manual

Quick-start guide for XENSIV™ PAS CO2 Sensor2Go
evaluation kit
(ABOC)
Figure 6 Start-up screen
3.3 Step 3: Connect XENSIV
Connect a XENSIV PAS CO2 Sensor2Go evaluation kit using a micro USB cable as shown in Figure 6.
TM
Figure 7 XENSIV
TM
After connecting the sensor, start the data acquisition by pressing a connect button. XENSIV
Sensor2Go GUI supports connection to multiple PAS CO2 devices (max 10). After pressing Connect button, all the
connected devices are listed in a tree view in the expandable CO
are available for each device (see Figure 7).
User manual
PAS CO2 Sensor2Go
TM
PAS CO2 Sensor2Go Evaluation kit connection to PC via micro USB cable
devices pane. Device settings and information
2
8 of 14
PAS CO2
TM
V 1.3
2024-03-01