Table of Contents
Advertisement
1.3
Installation Precautions
Safety measures
Please read the information and safety measures carefully prior to installation
and initial operation of the unit.
• Do not place any magnetic objects in the vicinity of the cutting head;
otherwise uniform contact pressure may not be ensured.
• Do not remove the connection cable to the computer while cutting is in
progress.
• Relieve the pressure on the pressure rollers when not in use by moving
the pressure lever up.
• Do not open or reach into the unit when it is connected to electricity supply.
• Never open the casing and do not make any modifications to the unit
yourself.
• Ensure that neither liquids nor metal objects are put inside the SC6500.
• Ensure that the wall socket used is grounded.
• Ensure that the connected voltage (100-240V) does not deviate by more
than ±10%. Otherwise install a voltage stabiliser.
• Remove the power plug from the unit if it will not be in use for a longer
period of time.
• Never reach into the unit in the vicinity of the blade holder during the
cutting operation.
• Stop any cutting jobs in progress before re-adjusting the blade holder.
• Always ensure that the Auto Sheet Cutter remains inaccessible to children
during operation and never leave the unit or individual parts of it switched
on without supervision.
• Do not touch the tip of the cutting blade to avoid injury.
• Always place the unit on a stable base or use the supplied stand to prevent
it from falling down.
• Disconnect from the power supply during thunderstorms; it can be
damaged or destroyed by electrical surges caused by lightning.
• Do not sit or step on the stacker tray. Stacker will break or machine will
tilt over. The maximums load for the stacker tray is 15 kg.
• Do not open covers while the machine is running.
• Do not move machine while the machine is running.
• Be cautious when the top lid is open. Prior to accessing the interior, always
ensure that the cutter is turned off and disconnected from power supply.
• This equipment is not suitable for use in locations where children are
likely to be present.
SC6500
• Do not use emergency stop button for regular operation of the Cutter.
The emergency stop button is designed for immediate stop solely for
emergency situations to ensure the safety of all individuals involved.
To reset the emergency stop button rotate it clockwise direction and pull it
back upwards to its original position. The emergency stop button should
only be reset after addressing and resolving the emergency condition that
triggered its activation.
Emergency stop button
3 January 2024
1-6
Installation Procedure
Advertisement
Table of Contents
