Intec ColorCut SC6500 Installation Instructions Manual page 11

F
5. Place the Internal Shelf [F] on the Central Support Brace, align all fixing
holes and screw it loosely in place with supplied screws (4x) [G], then
fully tighten all four screws.
6. On the left side of the unit locate two holes for door piece. Locate bottom
pin and top sprung pin on the door piece.
SC6500
H
G
I
7. Place the bottom pin [H] of the door into the bottom slot [I].
J
8. Push down the sprung loaded pin [J] on the door, slide the hinge into
the frame. Once positioned, gently release so the pin locates in the hole.
3 January 2024
1-10
Installation Procedure