Table of Contents
Advertisement
2. Load blank paper sheet(s) into the media tray. Adjust the self centering
side guides to the edges of the media. Ensure they are not too tight
against the side of the media.
3. Make sure the Cutter is connected to computer via USB or Ethernet
(Section 1.6.2)
4. Launch the ColorCut Pro application from your computer.
SC6500
Note: If the SC6500 is connected in the Settings (Section 1.6.3) you should
see a preview of the Vison3's CCD camera in the 'Live Preview' window.
3 January 2024
1-26
Installation Procedure
Advertisement
Table of Contents
Need help?
Do you have a question about the ColorCut SC6500 and is the answer not in the manual?