Table of Contents
Advertisement
1.5
Software installation
The ColorCut Pro software is a professional cutting package that creates
cutting files directly from Illustrator or CorelDRAW using the vector lines
you have drawn, ColorCut Pro communicates directly with your cutter and
ultimately cuts your jobs.
There are two installation versions of ColorCut Pro, a plug-in (which requires
Adobe Illustrator® (MAC or PC) or CorelDRAW® (PC)) which creates the cut-
ting jobs directly from your vector lines and can either send your jobs directly
to the cutter (PC only) or create a cut file that can be retrieved at any time
using a QR code (automatically added to the sheet) (MAC & PC clients) then
users can cut a different computer (acting as a production server).
ColorCut Pro Software for your ColorCut Cutter is supplied on the included
CD, however it may also be downloaded from Plockmatic Customer Center.
Note: ColorCut Pro requires a Minimum display resolution: 960×830.
1.5.1
ColorCut Pro Installation
1. Run the installation program: SetupColorCutPro.exe
The setup program requires various confirmations for the installation of the
program.
On some computers you could be asked the system administrator's pass-
word to execute the installation, in the case you do not have this information;
contact the technician who administrates your system.
SC6500
2. To start the installation of the ColorCut Pro software, click the [Next>]
button.
3. By default the ColorCut Pro software will automatically install into Adobe
Illustrator if it is installed on your computer.
4. If you have Adobe Illustrator, then the installation has completed and click
[No] on the dialogue box asking you if you wish to review the CorelDRAW
installation instructions.
5. If you have CorelDRAW, skip to the next page.
3 January 2024
1-16
Installation Procedure
Advertisement
Table of Contents
