Intec ColorCut SC6500 Installation Instructions Manual page 18

6. If you have Adobe Illustrator, then the installation has finished; go to
Section 1.5.2.
SC6500
ColorCut Pro installation for CorelDraw
Skip this section if you have installed ColorCut Pro for Adobe Illustrator.
As part of the ColorCut Pro installation, the plug-in's to CorelDRAW are
installed, however you need to add a shortcut into CorelDRAW.
1. Open CorelDRAW then click on the
Tools menu, and select Options.
2. From the Options dialogue box,
select: Customization and under
this, click Commands
3. In the panel on the right, select
macros from the drop down menu.
4. Select either:
- colorcutpro.process.
colorcutproall
- colorcutpro.process.colorcutpro
The 'colorcutpro.process.colorcutproall' version exports the entire drawing
however the desired way to work is with layers
The 'colorcutpro.process.colorcutpro' version only exports the currently se-
lected layer. Unless you want to export the entire drawing. If you are unsure,
we recommend using the 'colorcutpro.process.colorcutpro' version.
5. On the appearance tab menu (Under caption), change the name to
ColorCutPro. This is the name that will appear on the menu.
3 January 2024
1-17
Installation Procedure