Table of Contents
Advertisement
USB or Ethernet Connection confirmation
1.6.3
1. Launch ColorCut Pro.
2. When the ColorCut Pro application launches, click on the Settings
button [A].
B
3. The ColorCut Pro Settings dialogue box will appear.
4. If the connection to your cutter is successful then under the Output Device
option you will see the term 'USB Printing Support: x', where 'x' is your
cutter type, or 'Ethernet Direct connect'[B].
SC6500
A
C
5. If the Output Device shows, [File Output] then the connection has not
been successful [C]. Switch off the cutter and wait 10 sec. Unplug the
USB cable from your computer, and try a different port, then switch back
on the ColorCut engine. Wait unit the Home screen is displayed on the
SC6500 LCD panel. Repeat steps 1 to 4.
D
6. After confirming successful connection, select Device Type SC6500 from
drop-down menu [D].
7. Click [OK] to confirm and close the settings dialogue box.
3 January 2024
1-22
Installation Procedure
Advertisement
Table of Contents
