General Information; About These Instructions; Safety Signs; Signal Words - KBL megaSun K7S Assembly Instructions Manual

1. General information

1.1 About these instructions

This manual is intended for use by
• studio operator,
• qualified, trained and authorized service technicians.
Any person, assembling or disassembling this tan-
ning device, must have read and understood these
instructions. Always keep this manual at hand.

1.2 Safety signs

This symbol indicates that general haz-
ards exist for the human health.
This symbol indicates that due to electri-
cal tensions hazards exist to the human
health.
This symbol indicates that due to falling
loads hazards exist to the human health.
This symbol indicates the danger of
pinching.
When closing and opening panels and
covers, you can pinch your hands.
This symbol indicates the danger of
burns from hot lamps and housing parts.
If the tanning device was operated
before being opened, lamps and hous-
ing parts may be hot.
This symbol indicates that damages
may occur at the tanning device, at the
material or at the environment.
Danger due to leakages.
The tanning device can be damaged by
leaking connections.
• Slide the plastic tube up to the stop into the
quick connector socket.
1.2.1 IMPORTANT INFORMATION
This symbol does not identify safety
notices, but states information for a better
understanding.

1.3 Signal words

DANGER
• Death or serious injury is imminent.
WARNING
• Death or serious injury is possible.
CAUTION
• Moderate or minor injury is possible.
A s s e m b l y I n s t r u c t i o n s | megaSun K5 K6 K7
5