Definitions; Transport - KBL megaSun K7S Assembly Instructions Manual

1.4 Definitions

STUDIO OPERATOR
People who provide tanning devices to users on a
commercial basis. The studio operator is trained
to operate and maintain the tanning device. He is
responsible for the proper operation of the tanning
device as well as for compliance with the mainte-
nance intervals.
QUALIFIED, TRAINED AND AUTHORIZED
SERVICE TECHNICIAN
Qualified and safety-trained specialist personnel of
the manufacturer, or an outside company trained and
authorized by the manufacturer for the installation
and maintenance of KBL tanning devices.
6
A s s e m b l y I n s t r u c t i o n s | megaSun K5 K6 K7

1.5 Transport

Overturning load
Danger of being crushed by heavy parts
of the equipment.
• Maintain the safety distance to the
transport machine.
• Do not walk under the load.
• Wear safety shoes.
TRANSPORT BY FORKLIFT TRUCK
During transport the tanning device may
be damaged when using forklift forks
that are too short.
• Use only
(Minimum length 1.8m).
The tanning device is mounted on a pallet.
• Insert the forks carefully into the openings of the
pallet.
• Lift the load by a few centimeters.
• Transport the load carefully to the place of
installation.
OTHER MODES OF TRANSPORT
If a forklift truck cannot be used for transport, the tan-
ning device must be partially disassembled and the
parts must be transported individually to the place
of installation, e.g. using a dolly. Depending on the
weight of the components, lifting them might require
several people.
WARNING
sufficiently long forks