Assembly - KBL megaSun K7S Assembly Instructions Manual

5. Assembly

Assembly sequence
Assembly is performed in reverse order to the dis-
assembly instructions. Differences in the sequence
are marked in red.
Assembly steps
Assemble the feet
• Assemble the feet
• Connect left side connector and install the paneling
• Connect right side connector
Assemble the canopy
• Install Canopy
• Fasten intake air boots and mount cables and hoses
• Install side paneling (optional)
• Install upper paneling (optional)
• Install font plastic panels (optional)
• Install Infinity mirror (optional)
• Connect the plug at the bottom right (optional)
• Loosen the hinge and tighten the locking screw
Fold down the canopy
Install the rear air duct
• Install air duct
• Connect the plugs
Install electronic box
• Install electronic box
• Open electronics tray
• Connect mains cable
• Connect main fan plug
• Connect patch cable
• Install the cover plate of the electronics tray
• Connect ground cable
• Connect plugs
Refer to chapter
4.13
4.12
5.1.1
4.12.8
4.12.7
4.12.6
4.12.5
4.12.4
4.12.3
5.1.2
4.11
4.10
4.9
A s s e m b l y I n s t r u c t i o n s | megaSun K5 K6 K7
39