General Information; About These Instructions; Safety Signs; Signal Words - KBL K7 Series Assembly Instructions Manual

1. General information

1.1 About these instructions

This manual is intended for use by
• studio operator,
• qualified, trained and authorized service techni-
cians.
Any person handling, mounting or servicing this tan-
ning device must have read and understood these
instruction. Keep this manual ready to hand at all
times.

1.2 Safety signs

This symbol indicates that general haz-
ards exist for the human health.
This symbol indicates that due to electri-
cal tensions hazards exist to the human
health.
This symbol indicates that due to falling
loads hazards exist to the human health.
This symbol indicates the danger of
pinching.
When closing and opening panels and
covers, you can pinch your hands.
This symbol indicates the danger of
burns from hot lamps and housing parts.
If the tanning device was operated
before being opened, lamps and hous-
ing parts may be hot.
This symbol indicates that damages
may occur at the tanning device, at the
material or at the environment.
Danger due to leakages.
The tanning device can be damaged by
leaking connections.
• Slide the plastic tube up to the stop into the
quick connector socket.
1.2.1 IMPORTANT INFORMATION
This symbol does not identify safety
notices, but states information for a better
understanding.

1.3 Signal words

• Death or serious injury is imminent.
• Death or serious injury is possible.
• Moderate or minor injury is possible.
A s s e m b l y I n s t r u c t i o n s | KBL K5 K7 PRODUCT LINE
DANGER
WARNING
CAUTION
5