Safety Alert System - Terex PT-50 Operation And Maintenance Manual

This symbol is used as an attention-getting device throughout this manual as well
as on decals and labels fixed to the machinery to assist in potential hazard recog-
nition and prevention.
Hazard Classification
The following signal words used with the safety alert symbol indicate a specific
level of severity of the potential hazard. Signal words used without the safety alert
symbol relate to property damage and protection only. Warnings in this publication
and on the product labels are identified by these symbols.
DANGER
WARNING
CAUTION
NOTICE

2.1 Safety Alert System

This symbol means: Attention! Be alert! Your safety
is involved!
The safety alert symbol is used to alert you to potential
personal injury hazards. Obey all safety messages
that follow this symbol to avoid possible injury or
death.
DANGER indicates a hazardous situ-
ation which, if not avoided, will
result in death or serious injury.
WARNING indicates a hazardous sit-
uation which, if not avoided, could
result in death or serious injury.
CAUTION, used with the safety alert
symbol, indicates a hazardous situ-
ation which, if not avoided, could
result in minor or moderate injury.
NOTICE is used to address practices
not related to personal injury.
7
2 SAFETY