Actuator Controls - Branson Emerson Ultraseal 20 Operating Manual

6.1

Actuator Controls

This section describes how to operate a weld cycle using the Ultraseal 20 Actuator. For
more detailed information on making and altering settings, refer to your Controller
Manual.
CAUTION
The Ultraseal 20 Actuator is controlled by the Controller. Refer to your Controller manual
for tuning testing, setup and operating instructions
54
Keep hands away from under the horn when setting up and operating
the Actuator. Up force (pressure) and ultrasonic vibrations can cause
injury.
DCM00051 REV. 10