Warranty; Figure 1.2 Ce Mark - Branson Emerson Ultraseal 20 Operating Manual

1.2.1 Intended Use of the System
The Branson Metal Welding Controller and Ultraseal 20 Actuator are components of an
ultrasonic welding system. These are designed to crimp, cut and seal copper tubing.
1.2.2 Regulatory Compliance
The Branson Ultraseal 20 Actuator is designed to be in compliance with the following U.S.
regulatory and agency guidelines and standards:
• ANSI Z535.1 Safety Color Code
• ANSI Z535.3 Criteria for Safety Symbols
• ANSI Z535.4 Product Safety Signs and Labels
• ANSI Z535.6 Product Safety Information in Product Manuals, instructions
• NFPA 70 National Electric Code Article 670 Industrial Machinery
• NFPA 79 Electrical Standard for Industrial Machinery
• 29 CFR 1910.212 OSHA General Requirements for all machines
• 47 CFR Part 18 Federal Communications Commission
The Branson Ultraseal 20 Actuator is designed to be in compliance with the following
European standards as specified by the Directives issued by the European Parliament and
The Council of the European Union:
• Machinery Directive 2006/42/EC
• Low Voltage Directive 2014/35/EU
• EMC Directive 2014/30/EU
• BS EN ISO 13850 Safety of Machinery - Emergency stop equipment, Functional aspects -
Principles for design
• EN ISO 12100 Safety of Machinery - Risk assessment - Part 1: Principles
• EN 13849-1 Safety of Machinery - Safety Related Parts of Control Systems.
• EN 55011 Limits and methods of measurement of radio disturbance of industrial, scientific and
medical radio-frequency equipment
• EN 60204-1 Safety of Machinery - Electrical Equipment of machines
• EN 61000-6-2 Electromagnetic Compatibility - Generic standards - Immunity for industrial
environments
• EN 61310-2 Safety of Machinery - Indication, marking, actuation
All Ultraseal 20 Actuators are CE Compliant (see
Figure 1.2
DCM00051 REV. 10
CE Mark
Figure 1.2 below).
5