Connecting To The 5750 Via Web Interface - Orban OPTIMOD 5750 Operating Manual

2-24
Installation
•
Supply Voltages
System status and any failures
SETUP
There are four options with submenus under setup.
•
DISPLAY BACKLIGHT – Sets the brightness of the display.
•
NETWORK SETTINGS – Allows you to set the IP, Subnet and Gateway addresses for the processor (or choose
DHCP), and allows you to set port forwarding under REMOTE SETTINGS. STREAMING AUDIO is not yet
available in this version of the 5750.
•
DATE/TIME – Allows you to set the time to an NTP server or manually set the time.
A) If you are using an NTP server, touch "NTP" and the button will change from blue to green.
B) When setting the TIME ZONE, first choose the continent, then your region. For example, if
•
ACCESS CONTROL – Allows you to restrict parts of the processing to those you don't want to access or
adjust.
The MAIN MENU button takes you back to the main menu.
RECALL
Allows you to pick a preset to start with. You can use the up/down dobbies to scroll thru the menu, then touch the
LISTEN/SELECT button.
If you would like to compare presets, you may do so by scrolling to another preset and touching COMPARE. Every
time you touch COMPARE, it will toggle between the original preset and the new one you have selected.
Presets may be grouped by FACTORY, USER and FAVORITES for easier scrolling.
MODIFY
Unused at this time. Please connect to the IP address of the processor with a browser to modify a preset.

CONNECTING TO THE 5750 via WEB INTERFACE

The default address for the 5750 is 192.168.254.254 with a subnet of 255.255.255.0 and the gateway address 0.0.0.0.
It is preferred that you use a static IP address as opposed to HDCP. You may assign a static IP address of your own
using standard network protocols. Please use a switch between the PC and 5750 when connecting to set up a proper
network.
You can then select a server from the list of NTP servers by touching that button..
you choose AMERICAS you can choose Chicago and you're set. However, if you are in
Argentina, the third column will display localities in Argentina for you to select.