Table of Contents
Advertisement
3-30
Operation
Program Identification: (PI) 4 Digit HEX number corresponding to the station's "digital address" (ex: PI=3D44)
Program Type: (PTY) Index in PTY list that describes the broadcast format. (ex: 9 is "Top 40" in the United States)
Program Type Name: (PTN) 8 characters to further define program format.
Music/Speech (MS): Set for type of format (spoken word or music)
Stereo/Mono: Set to the mode you are transmitting with.
Traffic Program: (TP) Yes if the station broadcasts routine traffic reports. No if it does not.
TA Timeout: (TATIME) Seconds between start of TA flag and automatic reset to OFF.
Current Time: (TIME) Transmits the current time to receivers that have time sync. IMPORTANT – Make sure the 5750
has the correct time before enabling this feature or receivers will display the wrong time of day. If you aren't sure
you will be able to keep the system time correct, choose NO.
EAS TEXT: Displays a unique message when EAS mode has been triggered.
EAS TIME: Returns the number of seconds remaining for the current on-air EAS alert transmission.
UECP CLIENT (Universal Encoder Communication Protocol)
The RDS encoder supports network-based UECP connectivity with either the TCP/IP or UDP protocol. Use the
PHTML5 application to set these client settings from the RDS tab in the I/O Setup dialog: Site Address, Encoder
Address, TCP/IP Port number, UDP, and UECP Active status. Use the values suggested by your UECP Server software
for these fields.
The client TCP/IP Port is only updated at the OPTIMOD when you disconnect the PC remote software from the unit.
RDS MODULATOR
Turns on or off the RDS subcarrier. The Subcarrier level controls the amount of RDS injection. Orban suggests
using a modulation monitor that is capable of reading the 57 kHz subcarrier to make this adjustment.
Advertisement
Table of Contents
