Technical Data; General Technical Data; Standards And Approvals - Siemens SIMATIC Compact FF Link Operating Instructions Manual

Technical data

12.1

General technical data

What are general technical specifications?
The technical specifications contain:
● The standards and test values that observe and fulfil the described components.
● The test criteria used to test the described components.
12.1.1

Standards and Approvals

Standards and Approvals
The components described meet the following standards and approvals.
Currently valid certifications can be found on the rating of the relevant module.
Note
Exception for active field distributors
Valid standards and approvals are specified in the relevant certificates and/or on the rating
plates.
CE Label
The described components meet the requirements and protective aims of the following EC
directives and comply with the harmonized European Standards (EN), published for
programmable logic controllers (PLC) in the official gazettes of the European Union.
● 2004/108/EC "Electromagnetic Compatibility" (EMC Directive)
● 94/9/EC "Equipment and protective systems intended for use in potentially explosive
atmospheres" (ATEX).
Compact FF Link
Operating Instructions, 03/2015, A5E35651552-AA
12
77