Window Installation-Prepare The Window - Whirlpool ROOM AIR CONDITIONER Use & Care Manual

Assemble Mounting and Support Brackets
1. Determine the correct holes to attach the support bracket to
the mounting bracket. See "Thin-Wall Construction (vinyl,
wood, etc.)" or "Thick-Wall Construction (brick)" illustration,
depending on installation.
Thin-Wall Construction (vinyl, wood, etc.)
A
B
A. Mounting bracket
B. Support bracket
Thick-Wall Construction (brick)
A
B
A. Mounting bracket
B. Support bracket
8
Window Installation—Prepare the Window
2. Insert two 1¹⁄₂" bolts through holes in the mounting bracket
and support bracket.
3. Place one lock washer and one ¹⁄₄" nut on each bolt.
NOTE: Do not tighten the nuts as it may be necessary to
adjust the location of the support bracket, depending on the
thickness of your wall.
C
B
A
A. Mounting bracket
¹⁄₂
B. 1 " bolt
¹⁄₄
C. " nut
4. Insert the leveling leg into the support bracket.
A
B
C
A. Mounting bracket
B. Support bracket
5. Repeat for other mounting and support bracket assembly.
D
E
D. Lock washer
E. Support bracket
C. Leveling leg