Functions Introduction & Instructions - GVM -BX8C Manual

FUNCTIONS INTRODUCTION &
INSTRUCTIONS
Setting：
Press the [MODE] button to switch to the [
BT STATE: Press [TAB] to switch to [BT STATE] → Press [+/-] to
select [On/Off] to turn Bluetooth on or off.
BT RESET: Press [TAB] to switch to [BT RESET] → Press [+/-] to
select [Yes/No] for Bluetooth reset operation.
LANGUAGE: Support [Chinese/English], press [TAB] to switch
to [LANGUAGE] → Press [+/-] to select the language.
RESET: Press [TAB] to switch to [RESET] → Press [+/-] to select
[YES/NO] for system reset operation.
VERSION: Shows the current software version.
Spotlight Mode：
Long press the [Spotlight] button for 2 seconds to switch
between spotlight mode [
the display screen will show the corresponding icon.
Under Spotlight mode, you can only control the intensity and color temperature, press
[MODE] to switch to [CCT] mode.
INT: Press [TAB] to switch to [INT] → Press [+/-] to adjust the intensity of the light.
CCT: Press [TAB] to switch to [CCT] → Press [+/-] to adjust the color temperature.
Light Wand Mode
1. CCT：
Press [MODE] to switch to [CCT] mode to adjust the intensity,
color temperature, and green/pin shift of light.
INT: Press [TAB] to switch to [INT] → Press [+/-] to adjust the intensity of the light.
CCT: Press [TAB] to switch to [CCT] → Press [+/-] to adjust the color temperature.
G/M: Press [TAB] to switch to [G/M] → Press [+/-] to adjust the green/magenta offset.
] setting page.
] and light wand mode [
9
],