Watchguard Firebox SOHO 6 Wireless User Manual page 197

How do I allow incoming services such as POP3, Telnet, and
Web (HTTP)?
1 Type the IP address of the trusted network in your browser
window to connect to the System Status page of the SOHO 6
Wireless.
The default IP address is: http://192.168.111.1
2 From the navigation bar on the left side, select
Firewall => Incoming.
The Filter Incoming Traffic page opens.
3 Select the pre-configured service to allow.
4 Select Allow from the drop-down list.
5 Type the trusted network IP address of the computer hosting
the service.
6 Click Submit.
How do I allow incoming IP, or uncommon TCP and UDP
protocols?
Record the IP address of the computer that is to receive the
incoming data and the number of the new IP protocol. Follow
these steps:
1 Type the IP address of the trusted network in your browser
window to connect to the System Status page of the SOHO 6
Wireless.
The default IP address is: http://192.168.111.1
2 From the navigation bar on the left side, select
Firewall => Custom Service.
The Custom Service page opens.
3 Beneath the Protocol Settings fields, select TCP Port, UDP
Port, or Protocol from the drop-down list.
The Custom Service page refreshes.
4 Type a name for the service.
User Guide
Troubleshooting tips
171