Blocking External Sites - Watchguard Firebox SOHO 6 User Manual

For a TCP port or a UDP port, specify a port number. For a protocol,
specify a protocol number. You cannot specify a port number for a
protocol.
6 Click Add.
The following steps determine how the service is filtered.
7 Select Allow or Deny from the Incoming Filter and Outgoing
Filter drop-down lists.
8 Select Host IP Address, Network IP Address, or Host Range
from the drop-down list at the bottom of the page.
The Custom Service page refreshes.
9 Type a single host IP address, a network IP address, or the start
and end of a range of host IP addresses in the applicable
address field.
10 Click Add.
Repeat the previous three steps until all of the address information for this
custom service is set.
11 Click Submit.

Blocking External Sites

The default configuration of the SOHO 6:
• Allows the transmission of all packets from the trusted
network to the external network
• Prevents the transmission of all packets from the external
network to the trusted network
User Guide
N
OTE
Blocking External Sites
65