Watchguard Firebox SOHO 6 User Manual page 176

Chapter 11: Using VPNforce
3 Type a unique name for the new connection.
If this will be a unique policy for a specific user, enter a unique name to
help identify it. For example, you may want to include the actual name of
the end user.
4 Select the Secure option.
This is the default setting.
5 Select the Only Connect Manually checkbox.
6 Select the IP Subnet option from the ID Type drop list.
The Remote Part Identity and Addressing settings refresh to display the
appropriate fields.
7 Type 0.0.0.0 in both the Subnet and Mask fields.
These are the default values.
8 Select All from the Protocol drop list.
This is the default setting.
9 Select the Connect using checkbox and select Secure Gateway
Tunnel from the drop list.
154 WatchGuard Firebox SOHO 6