Watchguard Firebox SOHO 6 User Manual page 190

Chapter 12: Support Resources
6 Click Submit.
How do I set up and disable WebBlocker?
1 Type the IP address of the trusted network in your browser
window to connect to the System Status page of the SOHO 6.
The default IP address is: http://192.168.111.1
2 From the navigation bar at left, select
WebBlocker = > Settings.
The WebBlocker Settings page opens.
3 Select the Enable WebBlocker check box.
4 Type a passphrase in the Full Access Password field.
5 Type the number of minutes for the inactivity timeout in the
applicable field.
To disable WebBlocker, clear the Enable WebBlocker check box.
How do I allow incoming services such as POP3, Telnet, and
Web (HTTP)?
1 Type the IP address of the trusted network in your browser
window to connect to the System Status page of the SOHO 6.
The default IP address is: http://192.168.111.1
2 From the navigation bar at left, select
Firewall => Incoming.
The Filter Incoming Traffic page opens.
3 Select the pre-configured service to allow.
4 Select Allow from the drop-down list.
5 Type the trusted network IP address of the computer hosting
the service.
6 Click Submit.
168 WatchGuard Firebox SOHO 6