Resetting The Soho 6 To The Factory Default Settings - Watchguard Firebox SOHO 6 User Manual

Chapter 3: SOHO 6 Basics
System Security
The System Security is disabled. The system administrator
name and system administrator passphrase are not set. All
computers on the trusted network can access the
configuration pages.
SOHO 6 Remote Management is disabled.
VPN Manager Access is disabled.
The remote logging is not configured.
WebBlocker
The WebBlocker is disabled and the settings are not
configured.
Upgrade Options
The upgrade options are disabled until the license keys are
entered into the configuration page.
Resetting the SOHO 6 to the factory default
settings
Reset the SOHO 6 to the factory default settings if it is not possible
to correct a configuration problem. A reset to the factory default
settings is required if the system security passphrase is unknown
or the firmware of the SOHO 6 is damaged by a power
interruption. Follow these steps to reset the SOHO 6 to the factory
default settings:
1 Disconnect the power supply.
2 Press and hold the reset button.
3 Connect the power supply.
4 Continue holding the button until the red LED on the front of
the SOHO 6 goes on and then off.
5 Disconnect the power supply.
26 WatchGuard Firebox SOHO 6