Watchguard Firebox SOHO 6 User Manual page 191

How do I allow incoming IP, or uncommon TCP and UDP
protocols?
Record the IP address of the computer that is to receive the
incoming data and the number of the new IP protocol. Follow
these steps:
1 Type the IP address of the trusted network in your browser
window to connect to the System Status page of the SOHO 6.
The default IP address is: http://192.168.111.1
2 From the navigation bar at left, select
Firewall => Custom Service.
The Custom Service page opens.
3 Beneath the Protocol Settings fields, select TCP Port, UDP Port
or Protocol from the drop-down list.
The Custom Service page refreshes.
4 Type a name for the service in the Service field.
5 Type the new protocol number in the Protocol field.
6 Click Submit.
7 From the navigation bar at left, select
Firewall => Incoming.
The Firewall Incoming Traffic page opens.
8 At the bottom of the page, locate the new service under the
Custom Service list and select Allow from the drop-down list.
9 Type the IP address of the computer that is to receive the
incoming data in the Service Host field.
10 Click Submit.
How do I create a back up of my configuration?
It is often a good idea to back up your configuration in the event
that it is corrupted or that you lose your system administrator
name and passphrase. Follow these steps to create a back up of the
User Guide
Troubleshooting Tips
169