Factory Default Settings - Watchguard Firebox SOHO 6 User Manual

• The status of the upgrade options
• Configuration information for the trusted network and the
external network
• Configuration information for firewall settings (incoming
services and outgoing services)
• A reboot button to restart the SOHO 6
If the external network is configured to use the PPPoE protocol, the
System Status page displays a connect button or a disconnect button. Use
these buttons to start or terminate the PPPoE connection.

Factory Default Settings

The default network settings and configuration settings for the
SOHO 6 are as follows:
External network
The external network settings use DHCP.
Trusted network
The default IP address for the trusted network is
192.168.111.0.
The IP addresses for the computers on the trusted network
are assigned through DHCP.
Firewall settings
All incoming services are blocked.
An outgoing service allows all outbound traffic.
All of the firewall options are disabled.
The DMZ pass-through is disabled.
User Guide
N
OTE
Factory Default Settings
25