Watchguard Firebox SOHO 6 User Manual page 51

2 Click Reboot.
OR
1 Disconnect and reconnect the power supply.
To reboot a SOHO 6 located on a remote system, use one of these
methods:
The remote SOHO 6 must be configured to allow incoming HTTP (Web)
or FTP traffic from the Internet. See "Configuring Incoming and
Outgoing Services" on page 62 for information about how to configure a
SOHO 6 to receive incoming traffic.
1 Type the external network IP address of the remote SOHO 6 in
your browser window to connect to the System Status page of
the remote SOHO 6.
2 Click Reboot.
OR
1 Send an FTP command to the remote SOHO 6. Use an FTP
program to connect to the remote SOHO 6, and enter the
command:
quote rebt
User Guide
N
OTE
Rebootting the SOHO 6
29