Installation
CHAPTER 2
The SOHO 6 protects computers that are connected to it by
Ethernet cable. Follow the procedures in this chapter to install the
SOHO 6 in your network.
To install the SOHO 6, you must complete the following steps:
• Identify and record your TCP/IP settings.
• Disable the HTTP proxy setting of your Web browser.
• Enable your computer for DHCP.
• Make a physical connection between the SOHO 6 and your
network.
See the SOHO 6 QuickStart Guide included with the SOHO 6 for a
summary of this information.
User Guide
11
Need help?
Do you have a question about the Firebox SOHO 6 and is the answer not in the manual?
Questions and answers