Windows Xp Operating System Setup - Watchguard Firebox SOHO 6 User Manual

9 Click OK to close the Advanced TCP/IP Settings window, click
OK to close the Internet Protocol (TCP/IP) Properties window,
and then click OK.
10 Click Cancel to close the connection window.

Windows XP operating system setup

This section describes how to install and configure the network
components that are required for the Windows XP operating
system. These components must be installed before the MUVPN
Client will function correctly on a Windows XP computer.
From the Windows desktop:
1 Select Start => Control Panel
The Control Panel window appears.
2 Double-click the Network Connections icon.
3 Double-click the connection you use to access the Internet.
The connection window appears.
4 Click Properties and then click the Networking tab.
5 Make sure the following components are installed and enabled:
- Internet Protocol (TCP/IP)
- File and Printer Sharing for Microsoft Networks
- Client for Microsoft Networks
Installing the Internet Protocol (TCP/IP) Network
Component
From the connection window, Networking tab:
1 Click Install.
The Select Network Component Type window appears.
Double-click the Protocol network component.
2
The Select Network Protocol window appears.
User Guide
Preparing the Remote Computers to Use the MUVPN Client
117