Watchguard Firebox SOHO 6 User Manual page 189

2 Type the IP address of the trusted network in your browser
window to connect to the System Status page of the SOHO 6.
The default IP address is: http://192.168.111.1
3 From the navigation bar at left, select
Network = > Trusted.
4 Clear the Enable DHCP Server check box.
5 Click Submit.
How do I change to a static, trusted IP address?
To use a static IP address, select a network IP range and subnet
mask for the trusted network.
The network IP ranges and subnet masks in the table below are
reserved for private networks in compliance with RFC 1918.
Replace the Xs in the network IP address with a number between 1
and 254. The subnet mask does not need to be changed.
Network IP range
10.x.x.x
172.16.x.x
192.168.x.x
To change to a static, trusted IP address, follow these steps:
1 Type the IP address of the trusted network in your browser
window to connect to the System Status page of the SOHO 6.
The default IP address is: http://192.168.111.1
2 From the navigation bar at left, select
Network = > Trusted.
3 Select the Enable DHCP Server check box.
4 Click Submit.
5 Type the information in the applicable fields.
User Guide
Troubleshooting Tips
Subnet mask
255.0.0.0
255.240.0.0
255.255.0.0
167