Wais; Watchguard - Watchguard Firebox X1000 Reference Manual

a site's Internet service provider. The WatchGuard traceroute service is
for filtering UNIX-based UDP-style traceroute only. For DOS-based or
Windows-based traceroute packet filtering, use the ping service instead
(see "ping" on page 51).
traceroute uses ICMP and UDP packets to build pathways across
networks using the UDP TTL field to return packets from every router
and machine between a source and a destination. Letting traceroute into a
network may enable an outsider to create a map of your private network.
However, outbound traceroute can be useful for troubleshooting.
Characteristics
•
•
•

WAIS

Wide Area Information Services (WAIS) is a protocol used to search for
documents over the Internet originally developed at Thinking Machines
Incorporated. Although WAIS servers are becoming rare, some WWW
sites use WAIS to scan searchable indices, so it might be a good idea to
enable outgoing WAIS.
WAIS is based on the ANSI Z39.50 search protocol, and the terms Z39.50
and WAIS are often used interchangeably.
Characteristics
•
•
•

WatchGuard

The basic WatchGuard service allows configuration and monitoring
connections to be made to the Firebox. WatchGuard recommends
allowing this service only to the Management Station. The service is
typically set up on the trusted interface.
Reference Guide
Protocols: UDP, ICMP
Server Port(s): Not Applicable
Client Port(s): generally greater than 32768
Protocol: TCP
Server Port(s): 210 although servers can be (and often are) configured
on other ports, much like HTTP servers
Client Port(s): greater than 1023
Packet Filter Services
61