Enter Read/Write Passphrase Dialog Box; Polling Dialog Box; Syslog Color Dialog Box - Watchguard Firebox X1000 Reference Manual

CHAPTER 10: Field Definitions

Enter Read/Write Passphrase dialog box

Polling dialog box

Syslog Color dialog box

154
OK
Closes this dialog and saves any changes.
Passphrase
Enter the configuration (read/write) passphrase for the Firebox.
There can be only one read/write session open to a Firebox at any
time.
OK
Closes this dialog box and saves any changes.
Polling Rate
Enter the seconds used to update the status and light information.
Frequent updates place more demand on the Firebox, although
they make the display more accurate. You can type or use the
arrows to input the seconds.
Arrows
Use the arrows to select your preferred value.
Max Log Entries
Enter the maximum of log entries maintained in Traffic Monitor.
Entering 0 will allow the maximum number of log entries that can
be displayed. You can type or use the arrows to input the seconds.
Arrows
Use the arrows to select your preferred value.
Show Welcome message at startup
Enable this checkbox to show the Welcome screen every time
System Manager is launched.
Display Logs in Color
Enable this checkbox to display the Firebox logs according to the
specifications below.
WatchGuard Firebox System