Watchguard Firebox X1000 Reference Manual page 230

CHAPTER 10: Field Definitions
BUG Need to find out if in GUI and if so, where should it be in chapter.
218
Firebox IP
Enter the IP address for the Firebox.
PPP Initialization
Enter the PPP initialization string. This is a list of commands that
can be found in Chapter 9 of the Reference Guide.
Modem Initialization
These specify a chat session that occurs between the Firebox and
the modem to properly initialize the modem. In most cases the
default initialization is sufficient. A list of strings appear in the
Reference Guide.
Baud Rate
From the drop list select the PCMCIA expansion configuration
baud rate.
Flow Control
From the drop list select the flow control for the PCMCIA
expansion configuration.
Local Host IP
Enter the IP address for the local host.
Firebox IP
Enter the IP address for the Firebox.
PPP Initialization
Enter the PPP initialization string. This is a list of commands that
can be found in Chapter9 of the Reference Guide.
Modem Initialization
These specify a chat session that occurs between the firebox and
the modem to properly initialize the modem. In most cases the
default initialization is sufficient. A list of strings appears in the
Reference Guide.
WINS Servers (Primary and Secondary)
Enter the name of the primary and secondary WINS server. The
server values entered in this dialog box are used by the DHCP
server, RUVPN, and other features of the firewall.
WatchGuard Firebox System