Policy Manager; 1-To-1 Mapping Dialog Box; Add Address Dialog Box - Watchguard Firebox X1000 Reference Manual

CHAPTER 10: Field Definitions

Policy Manager

1-to-1 Mapping dialog box

Add Address dialog box

160
Interface
Select the interface from the drop list. The choices are external,
trusted, optional, IPSec.
Number of hosts to NAT
Select the number of host that should be translated to NAT.
Arrows
Use the arrows to select your preferred value.
NAT base
Enter the base for the exposed NAT range.
Real base
Enter the base for the real IP address range.
OK
Closes this dialog box and saves any changes.
Members
Lists existing groups, configured aliases, networks, and users.
Add
Select an alias, network, group, or address from the Members list.
Click Add to copy the selected member to the Members and
Addresses list.
Show Users
Displays the users and groups associated with the selected
member.
NAT
Click to open the NAT Setup dialog box. This dialog box enables
you to specify the public address to be used for this service.
Add Other
Click to open the Add Member dialog box. This dialog box
enables you to configure a new host or network member.
WatchGuard Firebox System