Mobile User Vpn Dialog Box; Nat Setup Dialog Box - Watchguard Firebox X1000 Reference Manual

CHAPTER 10: Field Definitions
Certificate Authority screen

Mobile User VPN dialog box

NAT Setup dialog box

212
IP Address
Enter the IP address of your Certificate Authority (CA) to get the
certificate for the mobile user.
Passpharse
Enter the passphrase of your Certificate Authority (CA) to get the
certificate for the mobile user.
Timeout
The duration in seconds the Management Station waits for a
response from the Certificate Authority. Use the arrows to select
your preferred value.
Type
Choose type from the drop list.
Value
Enter the value of the type.
OK
Closes this dialog box and saves any changes.
Enable Dynamic NAT
Enable this checkbox to enable Dynamic NAT. The default
configuration of dynamic NAT enables it from the Trusted
network to the External network.
Dynamic NAT Entries
A list of all Dynamic NAT entries.
Up
Select an entry and click to move it up in the list.
Down
Select an entry and click to move it down in the list.
Add
Click to add a new Dynamic NAT entry to the list above. This Add
Dynamic NAT dialog box opens.
WatchGuard Firebox System