Introduction
1.2.3.7 Technical specifications
This section provides the basic performance
parameters of this machine.
Some information may change as design
modification
1.3 Your Sany Machine
1.3.1 Machine directions
(A) Front
(B) Back
(C) Left
(D) Right
A
Fig.1-2
1.3.2 Breaking in a new machine
Your machine has been well adjusted and
tested before delivery, but the initial operation
on the machine in severe conditions will
seriously affect the performance or reduce
the service life of the machine. Thus Sany
recommends you to perform 100-hour test run
before putting the machine into production
use.
During the test run:
Preheat the machine before performing
•
any operations.
Safety, Operation & Maintenance - January 2020
1-4
D
C
STG Series Motor Grader
B