Table of Contents
Advertisement
production use.
During the break-in period:
Let the equipment warm up prior to any
•
operation.
Avoid operating or running the equipment
•
at a high speed in overload working
conditions.
Avoid sudden starting, rapid movement or
•
abrupt stop of the equipment.
Cool down the equipment system at the
•
end of every working day.
1.3.3 Equipment information
The serial numbers and model numbers on
the components are the only numbers that
your SANY distributor will need when ordering
replacement parts or requiring assistance
for your equipment. You can find the related
information on the data plate. It is a good idea
to record this information in this manual for
future use.
Product identification plate is riveted on the left
side of the rear frame(See Fig.1-3).
Fig.1-3
Introduction
SSR260
1-5
Advertisement
Table of Contents
