Safety Message Introduction; Safety Message Locations - SANY SPR160C-8 Operation And Maintenance Manual

Safety
supplied by us. The installation and/or use of such products can impair the active and/or passive
driving safety.
The manufacturer expressly excludes any liability for damage resulting from the use of non-original
parts or accessories.
2.2 Safety Message
2.2.1 Introduction
The following warning signs and safety messages are used on the equipment.
•
Make sure that you know the locations and information of all safety messages on the
equipment.
•
All safety messages must be in correct locations on the equipment. They must be kept clean for
easy reading. Never use organic solutions or gasoline to clean the messages as which can
cause the paints on the message to lose.
•
Besides warning signs and safety messages, there are also other messages on the equipment
that must be kept clean and intact.
•
Replace damaged or illegible signs/ messages immediately.

2.2.2 Safety Message Introduction

For safe operation of the equipment, this manual has illustrated the safety precautions and signs
fixed to the equipment, describing potential hazards and ways to avoid such hazards.
Before conducting operation and maintenance on the equipment, user and after-sale service per-
sonnel must understand all warning signs and symbols on the equipment, strictly follow the safety
rules and suggestions contained in this manual, and take positive actions so as to reduce the risk
of personal injury and death, the damage of equipment caused by improper service, and the risk of
unsafe factors, to the minimum.

2.2.3 Safety Message Locations

1
12
2-6
2
11
Operation and Maintenance Manual-Oct. 2018
SPR160/200C-8 Pneumatic Tire Roller
4
3
9
10
8
5
6
7