Intended Use - SANY SPR160C-8 Operation And Maintenance Manual

Safety
Before starting operation and maintenance,
operator and maintainer shall observe the fol-
lowing items:
•
Read and understand the whole manual.
•
Read and understand the safety notices in-
cluded in this manual and the safety mes-
sages on the equipment.
•
Never apply or operate your equipment
under any circumstances in a manner that
is prohibited in this manual.
•
If the amount of fuel added, content of par-
ticulates, or latitude is beyond the specifica-
tion of this type of equipment, damage
could occur and the warranty of your equip-
ment would become invalid.
The manual should be kept in the cabin all the
time for operator to refer to at any time. Con-
tact SANY dealer to obtain a new manual if
the original one is missing or cannot be read.
This manual should be regarded as a perma-
nent part of your equipment. If the equipment
is sold to a third party, give this manual to the
new owner. The equipment provided by
Hunan SANY Road Machinery Co., Ltd to its
buyer is in line with all specifications and
standards of buyer's country. If the equipment
is purchased from another country or some-
one of a third country, it might be lacking of
some safety devices or technical require-
ments necessary for using the equipment in
your country. In case you question whether
the equipment is in accordance with the
standards and specifications of your country,
contact SANY dealer before operating the
equipment.

2.1.2 Intended Use

This machine must only be used for:
•
Compaction of bituminous material, e.g. road surface layers.
•
Light compaction work in road construction (road sub-bases).
2-4 Operation and Maintenance Manual-Oct. 2018
SPR160/200C-8 Pneumatic Tire Roller
Fig 2-1