Advertisement
Quick Links
4 D O O R 6T H G E N BR O N CO
O FF-G R ID FLOO R
SYST E M
INS TAL L I NSTRUC T ION S
Please read the mounting instructions below carefully before attempting to install.
Be sure to check out the install video on the product page, if available.
Thank you for purchasing from Victory 4x4! Checkout our website, jcroffroad.com for other great off-road
products. Be sure to rate and review our product online. If you have any questions or are missing parts, please
don't hesitate to call us at 269-353-1184!
Advertisement
Related Manuals for JCROffroad OGFL-BR6G
Summary of Contents for JCROffroad OGFL-BR6G
- Page 1 Be sure to check out the install video on the product page, if available. Thank you for purchasing from Victory 4x4! Checkout our website, jcroffroad.com for other great off-road products. Be sure to rate and review our product online. If you have any questions or are missing parts, please...
-
Page 2: I Nclu D E D Hardware
I NCLU D E D HARDWARE 1/4”-20 x 1/2” 1/4” Black Button Head Washer 1/4” Flange Nuts 6mm x 25mm Button Head... -
Page 3: Included Parts
INCLU DE D PARTS... - Page 4 AS SE M BLY Start by assembling the (2) provided side brackets to the (2) front bracket using the 1/4” bolts, washers and flange nuts. Be sure to assemble in the correct orientation as shown below, with the cut outs in the side brackets pointing toward the middle.
- Page 5 AS SE MBLY Once the (2) side brackets are assembled and tight to the front, you’re going to install the (4) provided corner support brackets. These install using the provided 1/4” button heads, washers and flange nuts. Be sure to assemble in the correct orientation as shown below, with the back flange going on the inside of the front bracket and the inside flange on the outside of the side brackets.
- Page 6 AS SE MBLY With the (4) outside brackets assembled and tight with the corner supports, you can install the provided middle bracket using the 1/4” button heads, washers and flange nuts. This will install pretty much the same as the side brackets to the front and back brackets. Be sure to install in the orientation below with those teardrop cut outs at the top pointing out and down toward the middle.
- Page 7 A S SE MB LY...
- Page 8 A S SE M B LY Now that the frame of the floor is assembled and tight, you now need to do some disassembly on the inside of your Bronco. There will be (4) plastic covers over each of the factory tie down hooks that will need to be removed.
- Page 9 AS S E MBLY With the factory floor now out of the way, you can grab the frame you assembled and place it in the back of the Bronco. Be sure to make sure that the teardrop cut outs in the middle bracket are away from you, going in toward the front of the vehicle.
- Page 10 AS S E MB LY Now that the frame is in place, take the factory bolts that were removed to hold down the factroy hooks and use them in the same locations to secure the frame to the floor. Using a 10mm socket secure the bolts through the corner support brackets into the factory threaded holes.
- Page 11 A SS E M B LY Once the frame is bolted in place, you can grab one of your two floor panels and begin to install it to the frame. Any accessories you plan on installing to the floor panels need to be bolted in place before assembling to the frame.
- Page 12 AS SE M B LY Once both sides are tight, you are finsihed with your floor install. For placement and specific instruction of your new drawer or fridge slide, refer to your vehicle floor product page on our website for more details. This installation guide shows how to assemble one floor system, but the possibilities are endless! Check out the product page for inspiration on how to maximize your space by using a combination of Off-Grid Drawers and...