Abdeckungen montieren
– Abdeckung (E) mit 3 Schrauben mittels Er-
goline-Schlüssel festschrauben.
– Abdeckung (D) in die untere Führung ein-
setzen und Erdungsfahne befestigen.
– Abdeckung (D) einklappen und mit Schrau-
be (C) mittels Ergoline-Schlüssel fest-
schrauben.
– Kopfpolster (B) und Sitzpolster (A) aufle-
gen.
Abschlussprüfung
– Abschlußprüfung (Hochspannungsprüfung
nach VDE 0700 Teil 1) nach separater Ar-
beitsanweisung durchführen.
Funktionsprüfung
– Funktionsprüfung gemäß Übergabeproto-
koll durchführen.
Fitting the covers
– Use the Ergoline spanner to screw down
the cover (E) with three screws.
– Place the cover (D) in the lower guide, and
attach the earth wire.
– Tip up the cover (D), and use the Ergoline
spanner to tighten the screw (C).
– Place padded seat (A) and the padded he-
adrest (B).
Final test
– Carry out final test (high-voltage test to EN
60335-1) in compliance with the separate
working instructions.
Function test
– Carry out the function test in compliance
with the acceptance protocol.
51