Please read and observe ...
Installation site
When setting up Profi tanning devices, you must ensure that floors and
ceilings in areas used for industrial purposes are designed for a loading
of 1500 N/m
2
.
The load bearing capability of ceilings with wooden joists must be dem-
onstrated in detail.
If the actual maximum load exceeds that value, then a special certificate
must be obtained before you can use these premises.
Tools and outfitting
The following tools are required for the dismantling / assembly work:
– Cross-headed screwdriver 2
– Cross-headed screwdriver 3
– Double ended SW 10-19 mm spanner
26
– 3 and 4 mm Allen-keys
– Ratchet with SW 10, 17 and 19 socket sets