Bräungsgerät ausrichten
– Nivellierung des Gerätes überprüfen und
ggf. ausrichten.
– Evtl. Neigung des Bodens mittels Stell-
füßen (A) und (B) ausgleichen.
Achtung!
Das Oberteil muss beim Schließen
und Öffnen jeweils in der unteren
bzw. oberen Position verharren! Ist
dies nicht der Fall, Oberteil-Klapphilfe
nachstellen (siehe Gebrauchsanwei-
sung).
50
Aligning the sunbed
– Check the levelling of the unit, and align, if
necessary.
– If necessary, compensate any inclination of
the floor by means of the adjustable feet (A)
and (B).
Caution!
The canopy has to remain in the lower
or upper position when closing and
opening! If this is not the case, reset
the spring-loaded mechanism of the
canopy (see Operating Instructions).