Advertisement
Setting Oven Controls
To Set the Recipe Recall Feature
This feature
will ONLY recall a Bake, Convection
Bake, Cakes, Breads, Convection
roast, Slow Cook, Cook Time or a Cook
Time with a Warm & Hold added
setting. This feature
will not work with any other function
including a Delay Start, a Clean
Cycle or a Broil setting.
iNSTRUCTiONS
PRESS
DISPLAY
To Program
the Oven
to Begin Baking
immediately
and
record
a Recipe
(example:
for a Bake mode
at 425°C)
1.
Place the food in the oven.
Upper
2.
Press Oven.
3.
Press _
(Fig. 1).
4.
Press 4 2 5 (Fig. 2).
5.
Press and hold _
pad for at least 3 seconds or until a beep
sounds. The beep indicates that this recipe has been recorded
for
future recall.
Upper
Oven
425
for 3 seconds.
Fig. 1
Fig. 2
To Program
the Oven
to Begin
Baking
with
a stored
Recipe
1.
Place the food in the oven.
2. Press and then
(Fig. 2/.
3.
The Temperature
(and the cool< time, if programmed)
is recalled,
the oven will begin immediately
to cool< with the previously
recorded
recipe.
_and
then @
Restoring
factory
default
settings
When
new_ your appliance
left the factory
with predetermined
oven control setting. Over time, the user may make changes
to these settings. The following
options have user preferences
that could be modified
and may have been changed
since the
appliance
was new:
• 12 or 24 hour display
mode;
• Continuous
bake or 12-Hour Energy Savings mode;
• Silent or audible
control;
• Oven temperature
display
(Fahrenheit
or Celsius);
• Oven temperature
adjustment;
• Any stored recipes;
• Meat probe setting;
• Accent
Light brightness
setting.
Please remember
the if you choose to restore, ALL of the above preferences
wiii be restored to factory
default
settings, the
oven temperature
offset
will reset and any stored information
will be cleared.
1.
Press and hold 7 keypad until first beep sounds (about 6 seconds).
2.
Press @.
26
Advertisement
