Download Print this page

Kenmore Elite 790.4817 Series Use & Care Manual page 10

Double electric built-in oven

Advertisement

Consumer Defined Control
Note:
The Consumer
Defined
Control
features
are adjustments
to the control
that wiii
not affect
cooking
results.
These
include
the Oven
Lockout,
Temperature
Display
and
Silent
Control
Operation
features.
Setting
Oven Lockout Feature
The _%_u, pad controls the Oven Lockout feature.
The Oven Lockout feature
automatically
locks the oven door and prevents
the oven from being turned on. It does not disable
the clock, Kitchen Timer or the interior oven lights. The ovens can be
locked individually.
INSTRUCTIONS
PRESS
DISPLAY
To activate
the Oven
Lockout
feature
Upper
1.
Press Oven.
2.
Press and hold L%20, for 3 seconds.
3.
After 3 seconds, "DOOR",
"LOCKED"
will flash and "Lot",
and
"UPPER" will appear
in the display
(Fig. 1). Once the oven door
is locked
the "DOOR"
and "LOCKED"
indicator will stop flashing
and remain in the display.
Allow 15 seconds for the oven door to
lock.
Upper
Oven
OVEN
....... for 3 seconds
Fig. 1
To reactivate
normal
oven
operation:
Upper
1.
Press
Oven.
2.
Press and hold Loc%%T
for 3 seconds. "UPPER" and "LOC" will
disappear
from the display.
"DOOR"
and "LOCKED"
will flash in
the display
until the oven door has completely
unlocked.
2.
The wall oven is again
fully operational.
Note:
Because you can set the oven lockout individually, the lower oven
can be used when the upper oven lockout
feature
is on.
Upper
Oven
OVEN
LOCKOUT
for
3 seconds
Setting Silent Control Operation
Delay
Flex
The Startand Clean pads control the Silent Control
operation
feature.
The Silent Control operation
feature
allows the oven
control to be operated
without
sounds or beeps whenever
necessary. If desired the control can be programmed
for silent
operation
and later returned
to operating
with all the normal
sounds and beeps.
INSTRUCTIONS
PRESS
DISPLAY
To change
control
from
normal
sound operation
to silent
control
operation
Delay
1.
Press and hold Startfor 7 seconds (Fig. 2). After 6 seconds, "bEEP"
(On) will appear
in the display
(Fig. 3).
Flex
2.
Press Clean to switch between
normal
sound operation
(Fig. 3) and
silent operation
mode (Fig. 4).
3.
Press _)
to accept
the change
or press _
to reject the change.
Note: The control
will always
beep at the end of a kitchen timer
and will beep when a set temperature
has been reached,
even if the
control
is set to silent operation.
Delay
Sto_tfor 7 seconds
Flex
Clean
@or@
Fig. 2
Fig. 3
Fig. 4
lo

Advertisement

loading

This manual is also suitable for:

Elite 790.4818 seriesElite 790.4819 series